Meguiar's Hybrid Ceramic Tire Shine renews dull-looking tires with premium gloss enhancers, darkening the appearance and adding gloss. Advanced Hybrid Ceramic technology provides durable protection that keeps shining even when exposed to water! Plus, it bonds well to tires, reducing the likelihood of sling.

 

Gloss and durability in one advanced spray tire dressing

You haven't finished detailing your ride unless the tires have an amazing gloss and shine on them! Meguiar's has the perfect solution for getting tires looking their best with Meguiar's Hybrid Ceramic Tire Shine. This sophisticated formula contains premium gloss enhancers that add rich darkness and gloss, leaving behind an amazing shine! With the benefit of Hybrid Ceramic technology, you also get the durable protection you expect from a premium Meguiar's product. Not only do you get a long-lasting high gloss tire shine, but it also keeps shining even when exposed to water! The formula also bonds so well to tires that it reduces the likelihood of getting that dreaded tire sling down the side of your paint. Go from dull, average-looking tires to shiny tires with the added benefit of Hybrid Ceramic technology!

 

Tips for getting the best results:

1.      Shake product well.

2.      Use on clean and dry tires in a well-ventilated area.

3.      To clean tires thoroughly, spray with a product like Meguiar's D107 Citrus Power Cleaner Plus or Meguiar's D101 All Purpose Cleaner. Agitate with a tire brush and rinse off with water. Make sure the tire is fully dry. This step will remove all dirt, grime, and pre-existing tire dressing ensuring maximum performance.

4.      For a HIGH GLOSS SHINE:          

5.      Spray an even coat of tire shine directly on tires and let it self-spread.

6.      Remove any overspray from wheels or surrounding surfaces.

7.      For a MEDIUM GLOSS SHINE:

8.      Spray tire dressing onto tires and spread with an applicator pad, like our Soft Foam Applicators, or a towel.

9.      Remove any overspray from the wheels or surrounding surfaces.

10.   Note: This product sprays out of the container white but turns clear once it has set and bonded to the tire.

11.   Do not use on tires or seats of motorcycles, bicycles, or other two-wheeled vehicles.

12.   Avoid spraying onto brake rotors, drums, or brake pads. Application to these surfaces can become slippery.

13.   Do not apply, or allow the product to contact, tire tread.

14.   Remove spray tire dressing immediately from concrete or asphalt with detergent to prevent staining or slippery conditions.

15.   Store and transport tire shine in a secure, upright position.